Graphite FluorideGrease
2021-08-31 12:06:17
Graphite FluorideGrease1 Product NameGraphite FluorideGrease, Fluorographite polymer2 Composition Information on Ingr...
Molybdenum disulfide lubricating paste
Model Number : KTZ-G-10S
Product Introduction:
MoS2 lubricant made of highly refined lubricating oil and a variety of additives and solvents; having good extreme pressure resistance, anti-rust performance and lubricating performance.
Applications:
Mechanical lubrication of planes, chains, gears, drilling and non-circulating lubrication systems, with remarkable effects and convenient use
Main performance:
1. Good extreme pressure resistance, anti-rust performance and lubricating performance.
2. Lubricates and adsorbs on the metal surface to form a tight oily film layer, which plays a good role in protection and lubrication.
3. Convenient to carry and simple to use.
Instructions:
Shake the tank before use to mix the liquid in the tank evenly. For best results, please wipe clean the parts to be sprayed. Align the nozzle at the sprayed area and spray, and use the extension tube for the difficult-to-spray area. After spraying evenly, wipe off excess liquid.
Typical data:
Appearance： ark gray cream
Work penetration,0.1mm： none
Operating temperature，℃： -40-350
1. This product is canned in a pressurized container and should be used in a ventilated environment. Please avoid high temperature exposure and keep away from open flames.
2. Smashing, piercing or burning is strictly prohibited.
3. The aerosol can is made of tinplate, which is easy to corrode and rust. Please store it in a dry environment below 40°C.
4. Do not get in eyes,on skin. Necessary to wear protective gloves and goggles . Immediately wash affected hands and clothes with a high-efficiency detergent.
5. Keep out of the reach of minors.
6. This product is only used for industrial purposes.
7. Empty cans can be put into trash cans after puncture and flattening.
8. If it is not used up at one time, please invert the spray to remove the residue of the nozzle, spray until the white mist to prevent liquid leakage.
9. First aid measures:
In case of contact with eyes or skin, immediately flush with clean water and get medical attention. If inhaled, move the person to fresh air, and get medical attention if you feel unwell. If swallowed accidentally, do not induce vomiting and get medical attention immediately.
Packaging Details： 1kg/can
Est. Time： two years
Model Number : KTZ-G-10S
Product Introduction:
MoS2 lubricant made of highly refined lubricating oil and a variety of additives and solvents; having good extreme pressure resistance, anti-rust performance and lubricating performance.
Applications:
Mechanical lubrication of planes, chains, gears, drilling and non-circulating lubrication systems, with remarkable effects and convenient use
Main performance:
1. Good extreme pressure resistance, anti-rust performance and lubricating performance.
2. Lubricates and adsorbs on the metal surface to form a tight oily film layer, which plays a good role in protection and lubrication.
3. Convenient to carry and simple to use.
Instructions:
Shake the tank before use to mix the liquid in the tank evenly. For best results, please wipe clean the parts to be sprayed. Align the nozzle at the sprayed area and spray, and use the extension tube for the difficult-to-spray area. After spraying evenly, wipe off excess liquid.
Typical data:
Appearance： ark gray cream
Work penetration,0.1mm： none
Operating temperature，℃： -40-350
Specific gravity，g/ml : 0.667
Precautions:1. This product is canned in a pressurized container and should be used in a ventilated environment. Please avoid high temperature exposure and keep away from open flames.
2. Smashing, piercing or burning is strictly prohibited.
3. The aerosol can is made of tinplate, which is easy to corrode and rust. Please store it in a dry environment below 40°C.
4. Do not get in eyes,on skin. Necessary to wear protective gloves and goggles . Immediately wash affected hands and clothes with a high-efficiency detergent.
5. Keep out of the reach of minors.
6. This product is only used for industrial purposes.
7. Empty cans can be put into trash cans after puncture and flattening.
8. If it is not used up at one time, please invert the spray to remove the residue of the nozzle, spray until the white mist to prevent liquid leakage.
9. First aid measures:
In case of contact with eyes or skin, immediately flush with clean water and get medical attention. If inhaled, move the person to fresh air, and get medical attention if you feel unwell. If swallowed accidentally, do not induce vomiting and get medical attention immediately.
Packaging Details： 1kg/can
Est. Time： two years